MUSTANG SUSPENSION
AVAILABLE IN RED AND BLACK HAMMERTONE. PLEASE SPECIFY WHEN ORDERING.
CLICK IMAGE TO JUMP TO ITEMS.


FRONT
 
REAR

OTHER		  

 

FRONT

MU1TK BMR SUSPENSION
Tubular K-Member 1996-2004 Mustang 4.6L		 PRICE $249.95
(VIEW ITEM)
 
MU2TK BMR SUSPENSION
Tubular K-Member 1995 Mustang 5.0L		 PRICE $249.95
(VIEW ITEM)
 
MU1ESA BMR SUSPENSION
Tubular A-arms with rubber bushings, non-adjustable 1979-1993 Mustang 5.0L		 PRICE $189.95
(VIEW ITEM)
 
MU2ESA BMR SUSPENSION
Tubular A-arms with rubber bushings, non-adjustable 94-04 Mustang 5.0/4.6L		 PRICE $189.95
(VIEW ITEM)
 
MU1TCA BMR SUSPENSION
Tubular A-arms with Chrome moly rod ends, adjustable 1979-1993 Mustang 5.0L		 PRICE $299.95
(VIEW ITEM)
 
MU2TCA BMR SUSPENSION
Tubular A-arms with Chrome moly rod ends, adjustable 94-04 Mustang 5.0/4.6L		 PRICE $299.95
(VIEW ITEM)
 
CC100MU BMR SUSPENSION
Caster/Camber Plates for 1979-1989 Mustang		 PRICE $149.95
(VIEW ITEM)
 
CC102MU BMR SUSPENSION
Caster/Camber Plates for 1990-1993 Mustang 		PRICE $149.95
(VIEW ITEM)
 
CC104MU BMR SUSPENSION
Caster/Camber Plates for 1994-2004Mustang 		PRICE $149.95
(VIEW ITEM)
 
AA010 BMR SUSPENSION
Non-adjustable A-arms with polyurethane bushings - 2005+ Mustang		 PRICE $399.95
(VIEW ITEM)
 
AA019 BMR SUSPENSION
Adjustable A-arms with QA1 rod ends - 2005+ Mustang		 PRICE $499.95
(VIEW ITEM)
 
SB022 BMR SUSPENSION
Front 1-3/8" Swaybar - 2005+ Mustang
BMR sway-bars decrease body roll in your 2005+ Mustang resulting in a more predictable, neutrally balanced suspension. Our sway-bars are made from high quality, cold formed aircraft spec tubing which allows the bar to resist torsional fatique much better than hot formed bars.
 		 PRICE $199.95
(VIEW ITEM)
 
KM009 BMR SUSPENSION
2005 MUSTANG Race Tubular K-member with no motor mount provisions - OE power rack		 PRICE $449.95
(VIEW ITEM)
 
KM010 BMR SUSPENSION
2005 MUSTANG Tubular K-member with motor mounts - OE power rack		 PRICE $499.95
(VIEW ITEM)
 
 

REAR

  
TCA014 BMR SUSPENSION
Lower Control Arms w/poly bushings 1979-1998		 PRICE $169.95
(VIEW ITEM)
 
TCA015 BMR SUSPENSION
Lower Control Arms w/poly bushings 1999-2001		 PRICE $169.95
(VIEW ITEM)
 
TCA016 BMR SUSPENSION
Lower Control Arms w/radial bearings 1979-1998		 PRICE $339.95
(VIEW ITEM)
 
TCA017 BMR SUSPENSION
Lower Control Arms w/radial bearings 1999-2001		 PRICE $339.95
(VIEW ITEM)
 
UTCA012 BMR SUSPENSION
Upper Non-adjustable Control Arms w/poly bushings 1979-2001 		PRICE $129.95
(VIEW ITEM)
 
UTCA013 BMR SUSPENSION
Upper Non-adjustable Control Arms w/spherical bearings 1979-2001		 PRICE $219.95
(VIEW ITEM)
 
UTCA014 BMR SUSPENSION
Upper Adjustable Control Arms w/poly bushings 1979-2001		 PRICE $219.95
(VIEW ITEM)
 
UTCA015 BMR SUSPENSION
Upper Adjustable Control Arms w/spherical bearings 1979-2001 		PRICE $329.95
(VIEW ITEM)
 
TCA019 BMR SUSPENSION
Tubular Lower Control Arms w/poly bushings		 PRICE $134.95
(VIEW ITEM)
 
TCA020 BMR SUSPENSION
Adjustable Lower "Race" Control Arms w/rod ends 		PRICE $259.95
(VIEW ITEM)
 
TCA021 BMR SUSPENSION
Adjustable Lower "Street" Control Arms with poly bushing/rod-end combination		 PRICE $259.95
(VIEW ITEM)
 
TCA022 BMR SUSPENSION
Tubular Lower Control Arms, non-adjustable, with polyurethane bushing and spherical bearing combination		 PRICE $208.95
(VIEW ITEM)
 
TCA027 BMR SUSPENSION
Billet Lower Control Arms w/poly bushings - 2005+ Mustang		 PRICE $229.95
(VIEW ITEM)
 
UTCA017 BMR SUSPENSION
Tubular Upper Control Arm w/poly bushing		 PRICE $135.95
(VIEW ITEM)
 
UTCA018 BMR SUSPENSION
Tubular Upper Control Arm w/spherical bearing 		PRICE $175.95
(VIEW ITEM)
 
UTCA019 BMR SUSPENSION
Adjustable Upper Control Arm w/poly bushing		 PRICE $176.95
(VIEW ITEM)
 
UTCA020 BMR SUSPENSION
Adjustable Upper Control Arm w/spherical bearing		 PRICE $209.95
(VIEW ITEM)
 
SB023 BMR SUSPENSION
Rear 7/8" Swaybar - 2005+ Mustang
BMR sway-bars decrease body roll in your 2005+ Mustang resulting in a more predictable, neutrally balanced suspension. Our sway-bars are made from high quality, cold formed aircraft spec tubing which allows the bar to resist torsional fatique much better than hot formed bars.
 		 PRICE $199.95
(VIEW ITEM)
 
XSB005 BMR SUSPENSION
Rear Xtreme Anti-roll Bar 2005 MUSTANG
Rear anti-roll bars have been proven to eliminate torque steer and body roll during hard launches and will drastically improve the cars consistency as well as stability going down the track. The new Mustang chassis is even more susceptible to launch inconsistencies with only one, center mounted upper control arm. BMR's simple design allows it to work with stock or aftermarket rear end housings and it will clear all aftermarket exhausts and suspension components.
 		 PRICE $449.95
(VIEW ITEM)
 
CAB005 BMR SUSPENSION
Bolt-in Control Arm Relocation Brackets 2005 MUSTANG
A vehicles "Instant Center" determines it's ability to transfer weight properly upon acceleration. The angle of the upper and lower control arms produces an intersect point that initiates this weight transfer. With fixed control arm mounting points, it is not possible to tune this instant center position in the chassis. Our control arm relocation brackets provide additional rear mounting holes that allow you to alter the instant center by varying the control arm angles. This mod is recommended for any type of racing and should also be performed if the vehicle is lowered to correct the rear suspension geometry. Mounting hardware included.
 		 PRICE $134.95
(VIEW ITEM)
 
     
 

OTHER

  
SFC010 BMR SUSPENSION
SUBFRAME CONNECTORS 1979-1993 Ford Mustang Hardtop		 PRICE $249.95
(VIEW ITEM)
 

DSL008

BMR SUSPENSION
DRIVESHAFT LOOP 1979-2002
Most tracks require a driveshaft safety loop for cars running 12.99 or quicker. This NHRA approved loop is contoured to the Mustang floorpan for maximum exhaust clearance. May be bolted or welded directly to the floorpan.

 PRICE $69.95
(VIEW ITEM)
 
DSL010 BMR SUSPENSION
Front driveshaft loop 2005 MUSTANG
 		 PRICE $99.95
(VIEW ITEM)
 
DTB002 BMR SUSPENSION
Rear tunnel brace w/o loop 2005 MUSTANG		 PRICE $99.95
(VIEW ITEM)
 
DSL011 BMR SUSPENSION
Rear tunnel brace with loop 2005 MUSTANG		 PRICE $139.95
(VIEW ITEM)
 
DSL012 BMR SUSPENSION
Loop upgrade for rear tunnel brace DTB002		 PRICE $49.95
(VIEW ITEM)
 
PHR005 BMR SUSPENSION
Tubular Panhard Rod 2005 MUSTANG		 PRICE $99.95
(VIEW ITEM)
 
PHR006 BMR SUSPENSION
Tubular Adjustable Panhard Rod 2005 MUSTANG		 PRICE $134.95
(VIEW ITEM)
 
MPHR004 BMR SUSPENSION
Chrome Moly Adjustable Panhard Rod w/rod ends 2005 MUSTANG		 PRICE $185.95
(VIEW ITEM)
 
SP009 BMR SUSPENSION
1.25"Front / 1.75"Rear lowering springs
BMR springs are specifically designed to provide optimal handling without sacrificing ride quality. The front springs are progressive wound to provide variable rates. The soft portion of the progressive winding maintains near OE ride quality. When the suspension is loaded during aggressive cornering, the springs enter into the stiffer portion of the spring. We have designed additional spring rate into this portion of the spring for better control and reduced body roll. The rear springs are linear wound with the same proven spring rate as OE
 		 PRICE $229.95
(VIEW ITEM)
 
SP010 BMR SUSPENSION
1.5" Front / 2" Rear lowering springs
BMR springs are specifically designed to provide optimal handling without sacrificing ride quality. The front springs are progressive wound to provide variable rates. The soft portion of the progressive winding maintains near OE ride quality. When the suspension is loaded during aggressive cornering, the springs enter into the stiffer portion of the spring. We have designed additional spring rate into this portion of the spring for better control and reduced body roll. The rear springs are linear wound with the same proven spring rate as OE
 		 PRICE $229.95
(VIEW ITEM)
 
STB009 BMR SUSPENSION
2005-Present Ford Mustang V8
BMR strut tower braces are one of the most cost effective ways to improve handling on the the new Mustang platform. We build our braces out of heavy duty DOM tubing and use 3/16" laser cut mounting plates to keep tower deflection to a minimum. Simple 15 minute installation.
 		 PRICE $199.95
(VIEW ITEM)
 
STB011 BMR SUSPENSION
2005-Present Ford mustang V8 with Engine Cover
BMR strut tower braces are one of the most cost effective ways to improve handling on the the new Mustang platform. We build our braces out of heavy duty DOM tubing and use 3/16" laser cut mounting plates to keep tower deflection to a minimum. Simple 15 minute installation.
 		 PRICE $179.95
(VIEW ITEM)
 
SFC011 BMR SUSPENSION
2005 MUSTANG
HD Boxed Subframe Connectors
Boxed subframe connectors are made from heavy duty 1.5"x 2" main tubing and use both 1"x 2" and 1" gussets as well as 3/16" laser cut weld plates.
 		 PRICE $249.95
(VIEW ITEM)
 
SFC012 BMR SUSPENSION
2005 MUSTANG
Tubular subframe connectors are made from 1.75" diameter DOM tubing and 3/16" laser cut mounting plates		 PRICE $149.95
(VIEW ITEM)